VHT FLAMEPROOF™ COATING
VHT FLAMEPROOF™ Coating will renew and extend the life of most surfaces exposed to extremely high temperatures. This unique coating can withstand intermittent temperatures of up to 2000° F and is widely used on headers, collectors, exhaust manifolds, exhaust pipes, mufflers, turbo housings, down pipes.
Temperature:
1300°F-2000°F (704°C-1093°C)
Intermittent
Available in These Colors:
Downloads
Applications
Headers, Collectors, Exhaust Manifolds, Exhaust Pipes, Mufflers, Turbo Housings, Down Pipes (Will not bond well to stainless pipes. Aluminized and galvanized pipes must be sand blasted and cleaned before Flameproof is applied).
Curing FLAMEPROOF™ VHT FLAMEPROOF™ Coating only attains its unique properties after correct curing (refer to instructions on the can).
On the Vehicle
- Paint must be completely dry before curing
- Run at idle for 10 minutes
- Cool for 20 minutes
- Run at idle for 20 minutes
- Cool for 20 minute
- Run under normal operating conditions for 30 minutes
Off the Vehicle
- Paint must be completely dry before curing
- Heat to 250°F (121°C) for 30 minutes
- Cool for 30 minutes
- Heat to 400°F (204°C) for 30 minutes
- Cool for 30 minutes
- Heat to 650°F (343°C ) for 30 minutes
Dry Time
Curing time required and can be done on or off vehicle.
Finish
Flat
Coating System
VHT provides a high-performance coating system for the ultimate in protection and quality. The system includes surface preparation, primer, paint and clear coat.
Prime SP100 FLAMEPROOF™ Primer
Coat SPXXX FLAMEPROOF™ Color
Finish SP115 FLAMEPROOF™ Clear (Optional)